Browse by Manufacturer
Browse Categories
Price Ranges

DCC Standards


 DCC Tools

Be sure to see us on




Be Sure To Check Out
The Latest Gear From
These Great DCC 


The DCC Guys

ZIMO MX10 DCC Command Station

<< Previous in ZIMO DCC Next in ZIMO DCC >>
MSRP: $1,601.15
Price: $1,280.92
You Save: $320.23
Out Of Stock - Call Or Email For Availability
Backorders Accepted
Item Number: MX10
Manufacturer: ZIMO DCC
Manufacturer Part No: MX10

Optional Configurations

* denotes required field

ZIMO Warranty*

ZIMO MX10 DCC Command Station

The MX10 is the central unit or "Command Station" of the digital control system from ZIMO.

The ZIMO Command Station features modern technology and compact design.

At first glance, you see the very small dimensions (18 cm wide, 3 cm high), and the lack of heat sinks and fans.

Thanks to state-of-the-art power electronics - five high-frequency switching regulators for rail outputs and supply voltages - the device does not run hot, despite 20 A on the rail and 5 A on the bus (continuous load!).

The ZIMO system takes care of applications where high currents could cause damage (N-gauge, etc).

Thanks to special circuitry which manage shorts on the track when connected to the MX10, there are fewer sparks than on many weaker digital control systems.

The ZIMO system offers more than "a lot of power".

The advanced functionality of the ZIMO system is made possible through the incorporation of a high quality processor, expanded memory and robust software inside, plus quality measurement technology for precision RailCom detectors, a variety of integral bus connections and a standard integrated radio system.


MX10 Basic Equipment

The ZIMO MX10 DCC Command Station set includes the following: 
  • Command Station
  • WiMi Antenna
  • Terminal Block Set

NOTE: Power supply and handheld controller sold separately.

MX10 Front View

  • Knob: Adjusting current, power supply and other values, throttle, collective Stop (press for 2 sec), Standby initiate (4 sec), .. 
  • Multi-color screen: In normal operation display voltages and currents of the rail outputs, AOS inputs, communication, etc.
  • Button 1: Enable and define "automatic operations", Start decoder update, etc. 
  • Button 2: Access MX 10 menu (after scrolling knob), Start decoder sound loading, etc. 
  • Button 3: Start the driving operation from the MX10 ("Basecab"), General "Back" button, etc. 
  • USB socket for USB flash drive for carrying out the self-update, data loading and saving, decoder update and sound loading 
  • "SUSI" interface for fast sound loading for ZIMO decoders (takes about 1 min instead of 10 min) 
  • CAN socket for ZIMO cabs (controllers MX32, MX31, MX21, MX2) and ZIMO modules (MX8, MX9) 
  • XNET jack for input devices such as Roco Lokmaus, Massoth Dimax Navigator, and other XNET devices


The "Normal screen"

MX10 Normal Display

... and its Display Panels

Setting screens for: 


Current VOLT & AMP Master and Detail

Short Circuit Display (OVC)

Drive Screen

Menu for "BaseCab" Functions


MX10 Rear View

  • Far left: large screw terminals for power supply (NOT transformer) with galvanically isolated DC output, 25 - 35 V, 80 - 600 Watt 
  • Medium size screw terminals for "Track 1" (Schiene 1"" = Main Line) up to 12 A 
  • Triple screw terminals for DC voltages "S1" and "S2" (the precursors of the track outputs "Schiene 1" and "Schiene 2")
  • Small screw terminals for "Track 2" ("Schiene 2", as programming and decoder update track, or as a second circuit with its own data signal) up to 8 A
  • Above the screw terminals, 8 inputs for AOS's and other contact track inputs, emergency stop buttons, ... and 6 LED and relay outputs 
  • CAN socket for ZIMO devices with sync cables for connecting boosters and StEin modules 
  • LAN connector for Ethernet (for example, the wireless router), Loconet socket, USB client socket (to connect the computer), WiMi antenna



System Configuration

Typical system configurations consisting of MX10, MX32 cabs and MX32FU (wireless), Stationary Setup Modules of "StEin" class

NOTE: the use of "old" cabs (MX31, ...) is possible; but, for the "old" modules MX8 and MX9, special precautions must be adhered to (using the second CAN bus)

NOTE: In pure computer control or operation via virtual input devices (mobile phones, tablets, ... via USB, LAN), the MX10 can be used without cabs (controllers).

MX32FU radio cabs can be operated in tethered or radio mode. When operated with the current MX10 command station – in contrast to earlier ZIMO systems – NO additional radio module is required, as this is already built-in to the command station.

This figure shows a more extensive setup with multiple ZIMO devices:


Primary Power Supply, Driving Voltage and Driving Current

The Command Station requires an external regulated power supply (NO transformer) to provide primary power to the system, control bus and track outputs, which means a significant reduction of the power loss and heat compared to the "old" devices. Therefore, the ZIMO Command Station can achieve high output power (up to 600 W) from a very compact design.

Track output voltages are available in a wide range from 10 to 24 V, are stabilized and fully adjustable in fine steps (0.1V).

The main output ("Track 1", or "Schiene 1") delivers a maximum continuous operating current of 12 A, the second output ("Track 2", or "Schiene 2") 8 A; the latter can also be used as a programming or decoder update track. The current limit is also adjustable in fine stages (0.1A).

And of course, high voltage and short circuit protection is integrated into the design.  An important feature of the over-current or short-circuit protection is the adjustable threshold time to prevent cut-outs from little shorts on frogs, etc.

Moreover, the device can also detect differential overcurrent ("OVC adaptive") in addition to the absolute current so a shutdown occurs at sudden power increases, even though the absolute threshold has not been reached, to protect the wheels and pick-up shoes in small scales (N, TT, ...) when a true short circuit event occurs.

Netzgerät des MX10

The Power Supply (30 V, 240 Watt)
delivered with the Start Sets


Track Protocols and Data Management

DCC (NMRA or VHDM specification) and MOTOROLA (MM, the Märklin digital track signal) are the basic protocols supported.  The hardware and software are open for expansion to other standards, if such a need becomes necessary in the future, especially for faster methods of data transfer.

Of course, the possibilities of standardized protocols are fully exploited, so for DCC there are 10239 locomotive addresses, 2048 accessory addresses (each with 4 sub-addresses), 14/28/128 speed steps, 28 functions, etc.

RailCom and ZIMO "Train Number Impulse" (In German = Zugnummernimpulse = "ZACK") "Bi-directional communication" using "RailCom" is an integral part of all relevant components within the ZIMO system.

The MX10 is equipped with two "RailCom Global Precision Detectors", one for each of the rail outputs. "Global" means that it detects all those RailCom functions that are independent of the current position of the vehicle; "Local detectors" deal with address detection in single track sections. "Precision" means that reception and evaluation of the RailCom messages is carried out not only by the standardized thresholds, but that the RailCom signal is analyzed to decipher attenuated and distorted RailCom signals and to be readable even on large systems.

The global RailCom messages are optimized to increase the efficiency of data transfer to the decoders (to put it simply: RailCom messages are answered by DCC packets - because obviously arrived in the decoder - and do not need to be repeated). Above all, RailCom messages contain information which are then forwarded to driving devices and computers.

Simple applications are: reading and display of CV values in the "Operational mode" (i.e. on the main track), ongoing display of the driving speed (real time clock) measured in the decoder, alarm signals, or (in accessory decoders) the point positions, etc.

The ZIMO MX10 also recognizes the "classic" ZIMO train number pulses ("Zugnummernimpulse") sent by all ZIMO decoders (in DCC format since about 1998).

Booster Solutions

Boosters are usually only needed for very large layouts and/or large scales due to the high track current of the MX10 (up to 20A). The preferred solution is to use another MX10, which is synchronized with the "Central MX10". The use of foreign boosters is possible, but less advantageous, because the only communication with such devices is the outdated NMRA "Control Bus" (in practice, only simple short messages).

CAN Bus (internal to ZIMO System Communications) and Bus Systems for 3rd party products

On the MX10, as usual for ZIMO products, there are two parallel-connected CAN Bus sockets (RJ-45); these are 8-pin, because, besides the actual 6-pin CAN Bus, more connections are needed for a "sniffer" (front socket) or for booster and StEin module control.

Another socket (front) contains the X-bus (especially for ROCO Lokmaus and similar devices), the connection of third-party products such as S88, Loconet (Fred's) is forseen.

Wireless communication with ZIMO Cabs (controllers)

The MX10 is equipped with a Wi-Mi module. Mi-Wi is a variant of the "ZigBee" standard in the 2.4 Ghz band, which is approved worldwide, and provides a higher data throughput than the 344 MHz band previously used by ZIMO. Potential disadvantages compared to 344 MHz band with respect to the penetration inside buildings are compensated by the network capability.

LAN connection for Wi-Fi enabled input devices and as an alternative to a computer interface

Mobile phones and tablets (with suitable apps installed) can be used to control a layout via a wireless router connected to the LAN socket of the MX10, or via a connection to the home network.

The same LAN socket can also be used as an alternative to the USB interface for computer communication (advantage: more computers on the line).

USB (host) socket on the front panel for USB sticks and Micro USB (client) socket on the back

The USB (host) socket, is used to plug in a USB stick, from which you can update the MX10 and decoder software, as well as the loading of sound projects into a sound decoder.

Long experience (with the MX31ZL and MXULF) shows that the use of a USB stick is often easier than the update from a computer because uncertainties with operating system, drivers and interfaces disappear.

Alternatively, the USB (client) socket can be used to connect a computer, using software for decoder programming (ZCS, ADaPT - PFusch, TrainProgrammer, etc.), plus the decoder update and sound project loading (ZSP, ZIRC). Moreover, the programs for system control (STP, ESWGJ, TrainController, etc.) communicate via the USB (client) socket.

The MX10 ls the Decoder Update Device

As already mentioned above, the MX10 can be used in two ways for a decoder update:
1) The decoder update collection file ("Sammelfile") or sound projects are put on a USB stick and the decoder update or sound project loading is handle via the USB (host) socket.
2) The decoder update process is performed by connecting the MX10 via the USB (client) socket to the computer, so MX10 as just an interface between the computer and decoder.

The MX10 as Stand-alone Device - Digital Centre

Users who put no value on a "physical" hand controller, can use the computer with appropriate software (eg ESTWGJ, STP, TrainController, ADaPT, ...), and use phones and tablets, to control the layout , without "real" connected Cabs (controllers).


Check Out These Related Products...

ESU 53900 LokTester V2.0 DCC Decoder Test Station
MSRP: $52.90
Price: $42.25
You Save: $10.65
[ 1 ] pcs In Stock
ESU 53900 LokTester V2.0 DCC Decoder Test Station
Good Deals DCC - TT-10 - The Programmer Test Track - HO-N Scale Combo Test Track
MSRP: $76.95
Price: $61.56
You Save: $15.39
[ 3 ] pcs In Stock
Good Deals DCC - TT-10 - The Programmer Test Track - HO-N Scale Combo Test Track
Model Railroad Technologies Accutrack II Train Speedometer
MSRP: $81.95
Sale Price: $68.95
You Save: $13.00
[ 18 ] pcs In Stock
Model Railroad Technologies Accutrack II Train Speedometer
on sale
SBS4DCC "Sugar Cube" Speaker 11x15mm 8 ohm 1 watt w/ Double Deep Sound Chamber
MSRP: $11.50
Price: $8.62
You Save: $2.88
In Stock
SBS4DCC "Sugar Cube" Speaker 11x15mm 8 ohm 1 watt w/ Double Deep Sound Chamber
SBS4DCC "Sugar Cube" Speaker 13x18mm 8 ohm 1 watt w/ Double Deep Sound Chamber
MSRP: $16.50
Price: $12.35
You Save: $4.15
In Stock
SBS4DCC "Sugar Cube" Speaker 13x18mm 8 ohm 1 watt w/ Double Deep Sound Chamber
SBS4DCC "Sugar Cube" Speaker 8x12mm 8 ohm .7 watt w/ Double Deep Sound Chamber
MSRP: $11.50
Price: $8.62
You Save: $2.88
In Stock
SBS4DCC "Sugar Cube" Speaker 8x12mm 8 ohm .7 watt w/ Double Deep Sound Chamber
SBS4DCC "Sugar Cube" Speaker 9x16mm 8 ohm .7 watt w/ Double Deep Sound Chamber
MSRP: $12.50
Price: $9.35
You Save: $3.15
In Stock
SBS4DCC "Sugar Cube" Speaker 9x16mm 8 ohm .7 watt w/ Double Deep Sound Chamber
ZIMO MXTAPV DCC Decoder Test and Connector Board - Large and Small Scale
MSRP: $98.42
Price: $78.74
You Save: $19.68
[ 4 ] pcs In Stock
ZIMO MXTAPV DCC Decoder Test and Connector Board - Large and Small Scale
ZIMO MXULFA Decoder Update Module with LCD Display
MSRP: $246.70
Price: $197.36
You Save: $49.34
[ 6 ] pcs In Stock
ZIMO MXULFA Decoder Update Module with LCD Display

Product Reviews

(0 Ratings, 0 Reviews)
Mailing Lists



Stock Status...

Shopping Cart
Your cart is empty.

24 - 7 - 365
Any time... All the time.


On Domestic Orders
Over $150

No Coupon Required 


Free Shipping

Option At Checkout

Please Read Our
Limitations and Exclusions




Mailing Lists


Mark up to receive great DCC Tips and information about New Products, Pre-Orders, Sales, and Special Promotions.

for past newsletters and
great DCC Tip and Tricks



Welcome to SBS4DCC ...


Real-Time Stock Status 



Featuring the

Streamlined Backshop

"Sugar Cube" Speakers...

… the SWEETEST speaker 
available today!

4 Sizes  ...  18 Baffles

72 Sweet Speaker Options

Featuring the

Good Deals DCC

"The Programmer"
Test Tracks...

... Portable Programming

Made Easy

Featuring the

ESU LokTester

Decoder Test Station...

… take control of DCC Decoder

Testing and Programming!

Featuring The New


Decoder Test Stations...

... The Ultimate Decoder

Test Platform!

Featuring the

Model Railroad Technologies


Scale Speedometer...

SPEED has met it’s MATCH !

Featuring the

TCS TrainSpeed

Digital Model Railroad 

… Permanent 
Model Train Speed 
Measurement and Display ...

Be sure to see our ads in 
these great publications.

National Model
Railroad Association


Support the NMRA
Join Today!

Layout Design 
Special Interest Group
Make your model 
railroad more than just 
another track plan!

Join The NMRA
LDSIG Today!


OPerations Special 
Interest Group

Stop Running Trains.
Start Model Railroading!

Join The NMRA
OpSIG Today!