Browse by Manufacturer
Browse Categories
Price Ranges

DCC Standards


 DCC Tools

Be sure to see us on





Be Sure To Check Out
The Latest Gear From
These Great DCC 


The DCC Guys

ZIMO MS450R Standard DCC Sound Decoder - NEM652 8-pin Wired Connector

<< Previous in DCC - Mobile Decoders Next in DCC - Mobile Decoders >>
MSRP: $129.94
Price: $104.11
You Save: $25.83
[ 40 ] pcs In Stock
Backorders Accepted
Item Number: MS450R
Manufacturer: ZIMO DCC
Manufacturer Part No: MS450R

Optional Configurations

* denotes required field

ZIMO Warranty*
Optional Updates (Standard w/ Sound File Load)
ZIMO Sound File Options
Sound File ZSP Number (or Name)
Coded Sound Project Author (Requires Load Code Fee)

Save More With Quantity Discounts...

1 to 4$104.11
5 to 9$102.02
10 or more$98.90

ZIMO Elektronik... World Class Motor Control... Exceptional Value...

ZIMO MS450 DCC Decoders offer the following features:

The MS450 is the "standard model" for H0 scale sound in the ZIMO 16-bit decoder range.  It comes in a variety of formats, has plenty of power, 10 normal function outputs, 2 convertible logic level outputs, and connections for external energy storage, especially important for uninterrupted sound.


  • The predecessor in the "MX world" is / was: MX645.
  • The main version of the MS450 decoder family is the MS450P22, i.e. the sound decoder with PluX22 interface. PluX decoders have long been the "volume models" among the H0 decoders; they are gradually replacing the wired versions, including those with NEM-652 or NEM-651, and also those with a 21MTC decoder (see next paragraph). But the MS450 is of course also available wired : MS450 (free wires), MS450R (with 8-pin NEM-652 connector on wires), MS450F (with 6-pin NEM-651 connector on wires).
  • "MS-Sound" with 3 W fully digital sound amplifier for 8 Ohm or 4 Ohm (or two 8 Ohm parallel) speakers.
  • "Stay-alive": Direct connection for external energy storage - 16 V electrolytic capacitors or 15 V supercap (without upper capacity limit), eg ZIMO SUPERCAP68 against "getting stuck" and light flickering as well as for undisturbed sound.


Decoder Formats:

MS450R - NEM652 8-pin NMRA Interface Connector on 70mm wire
MS450P22 - NEM658 PluX22 Integral Connector for locos with built-in PluX socket
MS450P16 - NEM658 PluX16 Integral Connector for locos with built-in PluX socket
Dimensions: 1.18 x .59 x .16 inch (30 x 15 x 4 mm)


  • 1.2A Continuous-2.5A Peak Power
  • 10 - Normal Function Outputs
  • 0.8A Total current with overload protection
  • 2 - 5.0V Low Voltage Outputs
  • 0.2A Total current - Convertible to SUSI
  • SUSI Compatible
  • 1 - Switch Input
  • Direct capacitor energy storage support
  • 3 Watts Audio Power
  • 4-8 Ohms Speaker Impedance
  • 128 Mbit Sound Storage

Feature Summary:

  • 14, 28, 128 speed steps
  • 3-way adjustable back-EMF
  • Selectable frequency for noiseless operation
  • For all DC motors including coreless
  • 3-point or 28-step speed table
  • 5 digit addressing
  • All US lighting effects with programmable timing and dimming
  • Free mapping, NMRA mapping or Swiss mapping function control
  • NMRA bidirectional communication (RailCom)
  • Short circuit protection
  • Thermal protection
  • Reliable overload protection
  • User updateable firmware
  • Editable and updatable sound files

MS sound decoder MS440 to MS990 General and Special Properties

All ZIMO MS locomotive decoders are functionally largely identical.

  • REAL 16 bit resolution
  • 22 or 44 kHz sample rate
  • 16 channels
  • 128 Mbit memory
  • Multiprotocol: DCC, mfx *, MM


The MS sound decoders contain several components that are crucial for performance, but above all the "state-of-the-art" 32 bit ARM microcontroller with DSP properties and a fully digital sound amplifier , the HiFi sound quality with real 16 bit resolution and up to 44 kHz. These decoders are also a flowing further development of the previous generation, namely the MX-Sound-Decoder; almost every MS type has a counterpart with a similar designation in the "MX world". The proven "power electronics" (rectifier, output stages) were largely taken over from this MX world, and of course the designs and interfaces,

With the introduction of the MS generation, there will be ZIMO sound decoders from 2019 which, in addition to DCC and MM, also work with the mfx * rail signal , including automatic registration at Märklin digital centers. Like all ZIMO decoders, they are also capable of analog operation with DC and AC.

Note: Currently (November 2020) there are only MS-SOUND decoders!

The types of the MX range are still available as non-sound decoders . Of course there will also be a change in this area, mainly because it is necessary for mfx control; however, the differences between MX and MS with DCC control will be less significant than with decoders with sound.


  • DCC addresses 1 ... 10239, network addresses 1 ... 9999 (from 2017), MM addresses 1 ... 80, functions F0 ... F28), mfx,
  • 14, 28 or 128 (external) speed steps, 256 or 1024 internal steps
  • Programming the CVs in "Service Mode" (on the programming track) and in "Operational Mode" (with RailCom for acknowledging and reading out), under mfx, if available,
  • Undisturbed driving operation (without decoder reset and restart) in the event of contact interruptions up to 1 or 2 seconds (effective even without external energy storage)
  • Automatic continued travel if the wheel / rail contact is interrupted until the supply is restored (if there is sufficient energy storage - "Stay alive" - in the locomotive; see section "ENERGY STORAGE, below)").
  • DC and AC analog operation, the latter including a reversal of direction due to Märklin-typical overvoltage impulse (up to 35 V)
  • Update-capable software: new software versions are loaded without opening the locomotive, with the help of the ZIMO decoder update device MXULF (A) or the central controller MX31ZL from the USB stick or directly from the computer via ZSP ("ZIMO Sound Programmer ") and MXULF or (planned) via MX10.



  • Overcurrent protection for all outputs, overtemperature protection, for details see info under "Total current"
  • Protection against overvoltage peaks in the motor inductance by suppressor diodes
  • Dielectric strength: at least 35 V (depending on the type).



  • Low-noise high-frequency motor control, optionally with 20 or 40 kHz
  • suitable for all DC motors and bell armature motors (Faulhaber, Maxxon), with additional diodes also AC motors
  • also for "difficult cases" like Fleischmann round motors or old motors that are only suitable for low frequencies
  • ZIMO motor control with self-optimization and numerous setting options for manual optimization (PID parameters)
  • Speed characteristic optionally three-point or freely programmable in 28 steps (according to the standard)
  • Alternative "OST-WEST" direction control and feedback, together with base unit MX10 and remote MX32
  • (from SW version 5.00) km / h control (per speed step 1/2 km / h, 1 km / h or 2 km / h) as an alternative to conventional speed step control,
  • (from SW version 5.00) adjustable measure to compensate the gearbox backlash when reversing the direction to avoid the starting jolt
  • (from SW version 5.00) ZIMO acceleration settings ("conforming to the standard", additionally "exponential" for smooth starting / stopping, "adaptive" against starting jolt)
  • (from SW version 5.00) maneuvering key functions (half speed, reduction or switch-off of the start-up / braking time, optionally with F3, F4, or MAN)



  • full NMRA function mapping for F0 - F12, as well as ZIMO extensions (direction-dependent assignments, etc.)
  • Dimming, blinking, American (Mars, Ditch, Strobe, ...) and other light effects (soft start, brake light, flickering, automatic time-out, ..)
  • High beam / low beam switching via function key, one-sided light suppression, configuration of smoke generators, etc.
  • "ZIMO Swiss Mapping" for complex lighting conditions depending on several function keys, with individually assignable dimming and flashing functions
  • "ZIMO input mapping", especially for the user to exchange the function keys without changing the actual configuration
  • time-limited clutch control for Krois and Roco clutches; "Clutch waltz" (automatic pressure to relieve the hook and move away)
  • SUSI interface on the connector or as soldering pads, for large scale decoders with a 4-pin "SUSI plug"
  • In addition to the actual function outputs, all MS decoders have "logic level outputs",
  • for example as servo control lines or with an external transistor for normal consumers (LEDs, etc.)
  • All decoders with servo control: designs for N to H0 as a secondary function of the SUSI connections, large scale decoders with full 3-pin servo connections including 5V supply. Servo configuration with special CVs for end and middle positions, rotational speed, function assignment.



  • DC braking sections, ABC (stopping via asymmetrical DCC signal), "Märklin braking section"
  • ZIMO "signal-dependent train control" (HLU) with speed limits in 7 levels, from "full speed" to "stop": F, FL, L (slow), LU, U (slow), UH, H.
  • ZIMO train number recognition in connection with ZIMO digital system and ZIMO track section modules MX9
  • (in newer applications, especially with StEin modules or Roco feedbacks, the feedback works via RailCom)
  • (from SW version 5.00) constant braking distance in two course variants (braking always begins immediately, or the later, the lower the current speed is)
  • RailCom: km / h feedback, CV "on-the-main" readout and confirmed programming, east-west feedback, quality-of-service, track search, RailCom address feedback, and
  • many other RailCom applications are planned for future software versions.



  • Loading the sound projects similarly (with the same equipment) as loading the new software version (software update, see above),
  • i.e. with the help of the ZIMO decoder update device MXULF (A) or the central controller MX31ZL from the USB stick or directly from the computer via ZSP ("ZIMO Sound Programmer") (planned) via MX10.
  • Alternative fast charging (3 to 5 min instead of 30 to 1000 min) via SUSI interface (i.e. SUSI pins with proprietary protocol)
  • Powerful sound amplifiers: in miniature sound decoders 1 watt for 8 ohm loudspeakers; in H0 sound decoders 3 watts for 4 or 8 ohm loudspeakers (also two in parallel); in large scale sound decoders MS990 10 watts for 4 ohms or 8 ohms loudspeakers (also two in parallel) on a 10 V basis,
  • REAL 16-bit resolution encompasses the entire sound path: starting with the sound files stored in the flash memory, through the I²C bus (= Inter-IC sound) for stereo output, to the fully digital Class D amplifier . ZIMO dispenses with the cheaper digital-to-analog conversion (with 10 or 14 bit) and amplifiers with analog input (also called Class "D"), which are otherwise frequently used.
  • Playback rate 22 kHz (standard); but also channels (defined by the sound project) with 11 kHz (only at 8 bit) for simple noises, such as announcements, and 44 kHz for maximum possible hi-fi sound quality.
  • The MS decoders have a sound memory of 128 Mbit, which enables a playback time of 360 seconds (with 16-bit sound with 22 kHz). With 8 bit sound at 11 kHz, up to 1440 seconds are available (neglecting the overhead).
  • New sound projects have a resolution of 16 bit; but also previous sound projects with 8 bit sound audibly better with the MS decoders, which is due to the use of a technology for interpolation, which is available in ZIMO decoders thanks to the high computing power of the microcontroller.
  • Up to 16 sound channels are reproduced at the same time (e.g. chuffs, air pump, whistle, ...) and can be distributed to two loudspeakers with "stereo decoders" (especially for large railways, but also planned for H0).
  • Synchronization of the chuffs either by connecting an axis detector (mechanical, LED, Hall) or by a simulated axis detector, both for the sound and for the smoke fan control
  • Sound collection as a special form of the sound project: it contains sound samples and parameters for several series. For example the “europ. Steam / Diesel Collection ”with 5 sets of steam chimes, 10 whistles, 2 bells, ... Free selection from the available samples using a real-time procedure to create individual sounds.
  • (from SW version 5.00) acceleration and load dependency; automatic measurement run to adjust the load dependence



  • Standard H0 sound decoder: connection option for external energy storage devices (electrolytic capacitors, tantals, gold caps with unlimited capacity and 15 V or 16 V dielectric strength, even if the rail voltage is higher, e.g. ZIMO SUPERCAP68 or GOLMRUND, GOLMLANG); thus continuing to drive at full power despite the interruption of contact, avoidance of light flickering and sound disturbances, compensation of the energy loss due to RailCom and HLU gaps.
  • Next-sound decoder: the internal tantalum energy storage on a 5V basis can be expanded with external tantalum or gold caps (with proctically unlimited capacity 5 V or 2 x 2.7 V, e.g. ZIMO MINIGOLD); thereby slow driving, reduction of light flickering and sound disturbances.
  • Large-scale sound decoder: the internal 8V-based Goldcap memory (3 Goldcap cells with 3 or 1 F each) in connection with a step-up transformation of the voltage is usually completely sufficient to continue driving despite the interruption of contact, avoiding light flickering and Sound interference. In addition, external energy storage devices (electrolytic capacitors, tantals, gold caps with unlimited capacity and 15 V or 16 V dielectric strength, even if the rail voltage is higher; e.g. ZIMO GOLMRUND, GOLMLANG) can be connected.
  • The following applies to all decoders: with some additional components (diodes, resistors), energy storage devices (mostly electrolytic capacitors, at the level of the driving voltage, preferably 25 V) can be connected to all decoders, even those without special precautions. The efficiency (energy yield) is lower than in the cases mentioned above.



  • Synchronous rectifier instead of diode rectifier for sustainable reduction of the voltage drop and heat loss,
  • therefore continuous current up to 6 A without heat sink.
  • One, two or three function low voltages (up to 1 A) depending on the type of decoder: 5 V (as servo supply, often also for the smoke fan and for lights), 10 V and adjustable low voltage from 1.2 V to just under driving voltage.
  • Up to 14 "normal" function outputs (each 1 A loadable in groups of 4) depending on the type of decoder, plus a special output for the smoke fan.
  • 6 complete servo connections; for 3-pin standard servo plug (5V supply, control line, ground)
  • Gyroscopic acceleration sensor to influence the sound on inclines, curves, etc.


* Note: The decoders of the MS490 series are NOT mfx-capable in order to allow their small size.

"RailCom" is a trademark of Lenz GmbH

Check Out These Related Products...

Good Deals DCC - TT-10 - The Programmer Test Track - HO-N Scale Combo Test Track
MSRP: $84.95
Price: $80.70
You Save: $4.25
Out Of Stock - Call Or Email For Availability
Good Deals DCC - TT-10 - The Programmer Test Track - HO-N Scale Combo Test Track
Model Railroad Technologies Accutrack II Train Speedometer
MSRP: $84.95
Sale Price: $73.95
You Save: $11.00
[ 30 ] pcs In Stock
Model Railroad Technologies Accutrack II Train Speedometer
on sale
SBS4DCC "Sugar Cube" Speaker 11x15mm 8 ohm 1 watt w/ Double Deep Sound Chamber
MSRP: $11.50
Price: $8.62
You Save: $2.88
In Stock
SBS4DCC "Sugar Cube" Speaker 11x15mm 8 ohm 1 watt w/ Double Deep Sound Chamber
SBS4DCC "Sugar Cube" Speaker 13x18mm 8 ohm 1 watt w/ Double Deep Sound Chamber
MSRP: $16.50
Price: $12.35
You Save: $4.15
In Stock
SBS4DCC "Sugar Cube" Speaker 13x18mm 8 ohm 1 watt w/ Double Deep Sound Chamber
SBS4DCC "Sugar Cube" Speaker 8x12mm 8 ohm .7 watt w/ Double Deep Sound Chamber
MSRP: $11.50
Price: $8.62
You Save: $2.88
In Stock
SBS4DCC "Sugar Cube" Speaker 8x12mm 8 ohm .7 watt w/ Double Deep Sound Chamber
SBS4DCC "Sugar Cube" Speaker 9x16mm 8 ohm .7 watt w/ Double Deep Sound Chamber
MSRP: $12.50
Price: $9.35
You Save: $3.15
In Stock
SBS4DCC "Sugar Cube" Speaker 9x16mm 8 ohm .7 watt w/ Double Deep Sound Chamber
ZIMO MXTAPV DCC Decoder Test and Connector Board - Large and Small Scale
MSRP: $107.03
Price: $85.76
You Save: $21.27
[ 1 ] pcs In Stock
ZIMO MXTAPV DCC Decoder Test and Connector Board - Large and Small Scale
ZIMO MXULFA Decoder Update Module with LCD Display
MSRP: $267.50
Price: $214.32
You Save: $53.18
Out Of Stock - Call Or Email For Availability
ZIMO MXULFA Decoder Update Module with LCD Display

Product Reviews

(0 Ratings, 0 Reviews)

Backshop Services

Request a QUOTE for your

DCC Decoder Installation

project today!


Shopping Cart
Your cart is empty.


24 - 7 - 365
Any time... All the time.


On Domestic Orders
Over $150

No Coupon Required 


Free Shipping

Option At Checkout

Please Read Our
Limitations and Exclusions

Additional Handling
Charges May Apply

Mailing Lists


Mark up to receive great DCC Tips and information about New Products, Pre-Orders, Sales, and Special Promotions.

for past newsletters and
great DCC Tip and Tricks



Welcome to SBS4DCC ...


Real-Time Stock Status 



Featuring the

Streamlined Backshop

"Sugar Cube" Speakers...

… the SWEETEST speaker 
available today!

5 Sizes  ...  18 Baffles

90 Sweet Speaker Options

Featuring the

Good Deals DCC

"The Programmer"
Test Tracks...

... Portable Programming

Made Easy

Featuring the

ESU LokTester

Decoder Test Station...

… take control of DCC Decoder

Testing and Programming!

Featuring The New


Decoder Test Stations...

... The Ultimate Decoder

Test Platform!

Featuring the

Model Railroad Technologies


Scale Speedometer...

SPEED has met it’s MATCH !

Featuring the

TCS TrainSpeed

Digital Model Railroad 

… Permanent 
Model Train Speed 
Measurement and Display ...

Layout Design 
Special Interest Group
Make your model 
railroad more than just 
another track plan!

Join The NMRA
LDSIG Today!


Be sure to see our ads in 
these great publications.

National Model
Railroad Association


Support the NMRA
Join Today!

OPerations Special 
Interest Group

Stop Running Trains.
Start Model Railroading!

Join The NMRA
OpSIG Today!