ZIMO CAN BUS Ready Made Cable - CAN2.0 BUS To XNet Adapter Cable - 1m Long

ZIMO CAN BUS Ready Made Cable - CAN2.0 BUS To XNet Adapter Cable - 1m Long

ZIMO CAN BUS Ready Made Cables And Cable Material

CAN2.0 BUS Adapter Cable (= remote cable) 1m for connecting MX32, MX10 MX32FU to (X-Net), only required for simultaneous use with the MX9 CAN 1.0 in the same installation.

The ZIMO system components are connected by a CAN BUS Cable (CAN = Controller Area Network).  

CAN is a proven network in many industrial applications. 

The transfer rate of 125 kbit/s allows the cab bus and the feedback bus to be combined, even under extreme conditions with hundreds of occupancy detectors sending information to the PC and many "engineers" using the cabs to control their engines at the same time.

ZIMO CAN BUS Ready Made Cables are made using the same materials that are sold saparately and come with 6-pin plug on both sides. Available with length 15cm, 1m, 2m, 3m, 4m, 5m, 6m, 8m and 10m. The very short cable is especially for connecting Cabs or modules situated side by side.