REQUEST A QUOTE  -  STREAMLINED BACKSHOP INSTALLATIONS AND REPAIRS  -  MORE INFO 
Tam Valley Depot

Tam Valley Depot DCC Circuit Breaker

(No reviews yet) Write a Review
MPN:
CFJ003U
Condition:
New
Availability:
Backorders Accepted
MSRP: $39.99
Price: $33.99
— You save $6.00

Out of stock

Description

Tam Valley Depot DCC Circuit Breaker
 
 
This is the same board as the Dual Frog Juicer but confugured to work as a circuit breaker.  When there is a short it will cut off both rails at once.  This solves some problems where only one rail is cut off and wheels bridge to another active rail.  Also the auto-reverse has been disabled - this gets around the issue of having an auto-reversing section and frog juicers within the district powered by the circuit breaker. Cut off current limit can be set to either 2 Amps or 4 Amps with jumpers. LEDs have been changed to indicate green for normal operation and red for a short.  You can also add a remote LED to indicate a short. It has 33 Amp transistors so it can be used with 10 Amp boosters.  Setup is simple, connect the input to the DCC track bus, and connect the output wires to the district to be protected.
 
Note: you can convert a Circuit Breaker to a Dual Frog Juicer by removing the "CB" jumper or convert a Dual Frog Juicer to a Circuit breaker by adding the jumper.
 
View AllClose

Additional Resources

MANUFACTURERS WEBSITE:
SOUND CONFIGURATION & SOUND FILE RESOURCES:
NA
FIRMWARE & SOFTWARE RESOURCES:
NA
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES:
MANUFACTURERS WARRANTY & REPAIRS:
NA
ADDITIONAL INFORMATION - DCC TIPS:
ADDITIONAL INFORMATION (1):
NA
ADDITIONAL INFORMATION (2):
NA
View AllClose

Additional Information

PRODUCT CLASS :
All Scales
DECODER TYPE:
Accessory - Circuit Breaker
DECODER INTERFACE (PRIMARY):
Screw Terminal
DECODER INTERFACE (SECONDARY):
NA
SIZE-INCH (L x W x H):
0 x 0 x 0 in
SIZE-METRIC (L x W x H):
0 x 0 x 0 mm
FUNCTION CURRENT:
10A each
TRACK SECTION INPUT-OUTPUT:
1
CIRCUIT BREAKER:
YES
AUTO REVERSER:
NO
OCCUPANCY DETECTION:
NO
FUNCTION CONTROL INPUTS:
0
SWITCH MOTOR FUNCTION OUTPUTS:
0
STATIONARY - SIGNAL LIGHTING FUNCTION OUTPUTS:
0
SWITCH MOTOR TYPE - STALL MOTOR (TORTOISE SLOW-MOTION):
NA
SWITCH MOTOR TYPE - TWIN COIL SOLENOID (ATLAS SNAP):
NA
SWITCH MOTOR TYPE - BI-POLAR SOLENOID (KATO-PIKO-LGB):
NA
SWITCH MOTOR TYPE - SERVO MOTOR:
NA
PROTOCOL:
NA
BI-DIRECTIONAL COMMUNICATION:
NA
ADDITIONAL FEATURES:
NA
NOTES (1):
NA
NOTES (2):
NA
View AllClose