SoundTraxx 885032 TSU-KN1 Tsunami 2 DCC Sound Decoder - N Drop-in Board for Kato Wide Body Type

The Tsunami2 TSU-KN1

Tsunami2 meets N-Scale! The TSU-KN1 is our first plug-and-play Tsunami2 N-Scale decoder and installation kit. Finally, you can get the Tsunami2 features you have been wanting in your N-Scale locomotives! The new TSU-KN1 is designed to fit into Kato N-Scale E, F-units, F40PH, PA and P42 locomotives. Get an easy install and the amazingly realistic sounds plus the features that all Tsunami2 decoders have to offer.

DYNAMIC DIGITAL EXHAUST

For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible.

HIGH QUALITY SOUND LIBRARY

Our large selection of high quality sound effects include:

• 8 Prime Movers
• 14 Bells
• 40+ Airhorns
• Additional couplers, dynamos, cab chatter and more!
• ADDED REALISM
• Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more.

EASY INSTALLATION

The TSU-KN1 comes with a complete installation kit ensuring an easy install. Also note that the TSU-KN1 is designed with 4 LED friendly function outputs making external resistors unnecessary!

Installation kit includes:

• TSU-KN1 Decoder
• Mini Cube 3 Speaker and Baffle
• Speaker Wire
• Kapton Tape
• 2 Sunny White LEDs
• This decoder can be wired to a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions: 55 x 13.8 x 3.2mm
Max. Motor Stall Current: 500mA
Max. Function Current: 100mA (each output)
Function Outputs: 4
Audio Amplifier: 1 Watt, 8-Ohm Load
DCC Track Voltage: 7V – 22V
Sound Channels: 16

Common Decoder Features Include:

• Powerful 32-bit processor capable of 16 simultaneous sound channels
• Adjustable reverb and equalizer for the most realistic sound optimization ever!
• Train line charging effect
• More powerful amplifier for increased volume range
• Hyperdrive2 motor control
• Functioning locomotive and train brakes with adjustable braking rates
• 20+ Hyperlight lighting effects
• 4 function outputs
• Standard, 3-point and user-loadable speed curves
• Flex-Map function mapping easily maps any functi on to any key
• Compatible with NMRA DCC Standards & RPs

Steam Features:

• Ten new or remastered exhaust chuffs in a single decoder
• Dynamic Digital Exhaust with drifting feature changes under load
• Rod clank and valve packing sounds
• Adjustable exhaust cutoff
• Over 60 whistles
• Selectable compressors, bells, dynamos, couplers, and more
• Fireman Fred sounds for coal-fired, wood, oil, or auger fueled locomotives
• Locomotive servicing sounds
• 2-cylinder and articulated settings plus new 3-cylinder exhaust chuffs
• Cylinder cocks, blowdown and wheelslip effects

Diesel Features:

• Each diesel version (EMD, GE, etc.) contains up to 9 manufacturer specific prime movers (Turbo, Non-turbo, etc.)
• First ever Diesel Dynamic Digital Exhaust (DDE) for a more authentic operati ng experience
• Startup, shutdown and exhaust through 8 notches
• Automatic or manual notching
• Functioning dynamic brake with variable load sound and adjustable braking rate
• Over 40 air horns
• Selectable compressors, bells, and couplers
• First ever Fireman Ed is ready to work on the locomotive, with general service, cab sounds and more!
• Clickety-clack, fueling, and authentic cab chatt er add realism
• Prototypically correct HEP modes and steam heat for authentic passenger train operations

Electric Features:

• First ever Electric DDE with traction motor whine
• Pantograph operation sounds
• Over 40 airhorns/air whistle selections
• Motorman Omura provides cab sounds, operates doors and services the engine
• Catenary arcing sound and lighting eff ect
• Selectable compressors, bells, and couplers
• Clickety-clack and authentic cab chatt er add realism
• Trolley bell, stop requests, and door sounds for trolleys and tracti on models
• Steam heat for authentic passenger train operation

Decoder Specifications: 

• Preloaded Sound Files with Multiple Bells and Horns
• Size: 1.0 x 0.41 x 0.16 Inch (25 x 10.5 x 4.1 mm)
• Connection: N Drop-in Board and Installation Kit for Kato Wide Body Type E/F/PA/F40/P42
• Motor Rating: 1.0 Amp Max
• Functions: (6) 100mA outputs
• BEMF: Yes
• Sound: Polyphonic 16-Bit Processor, 7-Band Equalizer, Reverb
• Speaker Rating: Speaker Not Included - Requires Speakers Rated at 1.0W, 8 ohm
• Capacitor:  Solder pad for CurrentKeeper connection
• Protocol: NMRA DCC Compliant (Multi-Protocol Options Available)
• Transponding: Digitrax Compatible
• Additional Features: Digital Sound Sync, Fwd and Rev Trim Adjustment