Search
Browse by Manufacturer
Browse Categories
Price Ranges


Search Shopping Lists


 



 DCC Tools




DCC Standards









 
 
TBD
-------------------------

TBD
-------------------------

TBD 
-------------------------

TBD

Stop by and say Hi!
 

 
Be sure to see us on
 
 






 












 

Be Sure To Check Out
The Latest Gear From
These Great DCC 
Manufacturers













The DCC Gurus












NixTrainz Decoder Buddy 21-HW - 21MTC Adapter Board - NEM660 21MTC Integral Connector

<< Previous in DCC - Parts & Supplies Next in DCC - Parts & Supplies >>
Price: $16.00
[ 23 ] pcs In Stock
 
Backorders Accepted
 
Item Number: NXTZ1
Manufacturer: Distributed by SBS4DCC.com
Manufacturer Part No: NXTZ1
NixTrainz Decoder Buddy 21-HW - 21MTC Adapter Board - NEM660 21MTC Integral Connector

Dimensions:  17mm x 56mm x 7mm To Top Of Pins

 

Pin Out Diagrams


image7

image8



Decoder Buddy Information

This product is versatile in terms of direction of the placement of the board and mounting in various configurations.  It can easily replace a QSI board, a Dual Mode decoder board or be mounted directly on the electric motor or frame with Kapton tape.  (It is recommended that a piece of Kapton tape be placed on the bottom of the mother board to assure electrical isolation from the electric motor or frame.)

This mother board does not include the 21 Pin Decoder.

This mother board and connector board require soldering.

These printed circuit boards are NOT FOR USE IN A DC SYSTEM.

The on board resistors are sized for LEDs. (2.2K)


The mother board includes; 
  • One 21 Pin Decoder receptacle,
  • Two pairs of track input pads,
  • One pair of motor input pads,
  • One pair of keep alive pads (U+ and GND),
  • Two pairs of speaker pads wired in parallel,
  • Resistors for use with LED lighting. (on board 2.2K)

The connector board contains pads for eight pairs of lighting function connections. U+ or the blue wire has eight connected pads for the common power source. The negative (-) discrete function pads are all labeled to indicate their connection to the functions available in the decoder.

If you require incandescent lamps there are procedures that require soldering and allow for incandescent lamp use.  Remember there are different incandescent lamp voltages that have to be taken into consideration also.

The lighting connector  was designed so that the shell of the diesel locomotive can be easily separated from the frame without unsoldering wires. This does require that the headlight and rear lights be mounted in the shell of the locomotive and that the diesel has a removable dynamic brake shell.


Dimensions

17 mm x 56 mm x 0.9 mm  (0.67”  x  2.20”   x   0.35”)

Height may vary slightly depending on decoder.


Decoder Buddy Output Cross Reference

Decoder LokSound SoundTraxx
Pin # Buddy Select V4.0 & V5.0 T2 & Econami
3 A6 A6
4 A4 A4 Fx6
7 F0r F0r F0r
8 F0f F0f F0f
13 A3 A3 Fx5
14 A2 A2 Fx4
15 A1 A1 Fx3
17 A5 A5


Basic Installation
  
Tools required:
  • Soldering iron 15 Watt range
  • Solder and flux
  • Cutting pliers and pliers
  • #1Phillips screw driver
  • (#2 Phillips screw driver to remove the weights from the frame)
  • Wire stripper
  • Tweezers

The mother board is easier to see in this expanded view (below).  The four pads arranged vertically on each end are, from top to bottom, Track, Speaker, Speaker, Track.  The Speaker pads are wired in parallel, top to top and bottom to bottom.  The four labeled pads across the top are U+ a nominal 14 volts, Ground and two MOTOR connections (Orange on the left and Gray on the right).  The two motor pads have through holes in the center to allow for wire insertion from the bottom of the printed circuit board for a neater connection.  A consistent motor connection color scheme does not seem to exist so these two pads are not labeled as to polarity or color.  You should test that the locomotive runs in the correct direction before reinstalling the shell. U+ and GND are provided for a keep alive.  The 21 pin connectors should fit together easily.  Do not try to force the decoder board onto the mother board.  If disassembly is required a sharp or narrow object inserted at the end of the connector to move the board a little at a time from each end is effective.


The connector board is arranged so the wires from one end of the locomotive are routed though one side of the locomotive and wires from the opposite end are routed through the other side.   Function 0f is usually the front headlight and function 0r is usually the rear headlight.   A1, A3 and A5 occupy the pads on one side of the connector board.  This was done in an attempt to organize the decoder functions and output wires to the front and back of the locomotive. (See the compatibility table for different decoder manufacturer’s pin configuration outputs.) U+, the blue wire or common are all connected to the four holed pads which are both connected within the connector board.  Note that when the direction of the <=DECODER points toward the 21 pin decoder the keyed 10 pin connector will mate properly.  The connectors should fit together easily.  Do not try to force either connector board or decoder onto the headers on the motherboard until pins correctly positioned. After the pins are aligned properly firmly press the connector board and the decoder onto the motherboard so there is no space between the header and the printed circuit board.  In some installations it may be possible to separate the connector board from the motherboard before removing the locomotive shell.  This makes the process of separating the frame and motor parts from the lights in the shell less cumbersome.  


Checklist Procedure:
  1. Remove the shell of the locomotive,
  2. Unsolder or cut
  3. Track wires (4),
  4. Speaker wires (2),
  5. Motor wires (2),
  6. Light wires,
  7. Keep alive wires (2) it is important to label (or measure) polarity,
  8. Remove the screws attaching the decoder to the frame weights.
  9. Attach the motherboard to the frame, frame weights or motor.

Solder 
  1. Track wires (4),
  2. Speaker wires (2),
  3. Motor wires (2), (test the direction of the motor before soldering),
  4. Keep alive wires (2) to the correct polarity terminals (U+ and GND) if desired,
  5. Solder light wires to the connector board,
  6. Attach the connector board to the motherboard.
  7. Test the installation before firmly attaching the shell.

Enjoy your newly updated locomotive!!!


Manufacturers Website:  NixTrainz

Check Out These Related Products...

ESU 53452 LokProgrammer Set
MSRP: $179.99
Price: $143.99
You Save: $36.00
Out Of Stock - Call Or Email For Availability
 
ESU 53452 LokProgrammer Set
ESU 53900 LokTester V2.0 DCC Decoder Test Station
MSRP: $52.90
Price: $42.32
You Save: $10.58
[ 5 ] pcs In Stock
 
ESU 53900 LokTester V2.0 DCC Decoder Test Station
Good Deals DCC - TT-10 - The Programmer Test Track - HO-N Scale Combo Test Track
MSRP: $78.70
Price: $62.96
You Save: $15.74
[ 4 ] pcs In Stock
 
Good Deals DCC - TT-10 - The Programmer Test Track - HO-N Scale Combo Test Track
Model Railroad Technologies Accutrack II Train Speedometer
MSRP: $81.95
Sale Price: $65.90
You Save: $16.05
[ 16 ] pcs In Stock
 
Model Railroad Technologies Accutrack II Train Speedometer
on sale
SBS4DCC "Sugar Cube" Speaker 11x15mm 8 ohm 1 watt w/ Double Deep Sound Chamber
MSRP: $11.50
Price: $10.35
You Save: $1.15
In Stock
 
SBS4DCC "Sugar Cube" Speaker 11x15mm 8 ohm 1 watt w/ Double Deep Sound Chamber
SBS4DCC "Sugar Cube" Speaker 13x18mm 8 ohm 1 watt w/ Double Deep Sound Chamber
MSRP: $16.50
Price: $14.85
You Save: $1.65
In Stock
 
SBS4DCC "Sugar Cube" Speaker 13x18mm 8 ohm 1 watt w/ Double Deep Sound Chamber
SBS4DCC "Sugar Cube" Speaker 8x12mm 8 ohm .7 watt w/ Double Deep Sound Chamber
MSRP: $11.50
Price: $10.35
You Save: $1.15
In Stock
 
SBS4DCC "Sugar Cube" Speaker 8x12mm 8 ohm .7 watt w/ Double Deep Sound Chamber
SBS4DCC "Sugar Cube" Speaker 9x16mm 8 ohm .7 watt w/ Double Deep Sound Chamber
MSRP: $12.50
Price: $11.25
You Save: $1.25
In Stock
 
SBS4DCC "Sugar Cube" Speaker 9x16mm 8 ohm .7 watt w/ Double Deep Sound Chamber
ZIMO MXTAPV DCC Decoder Test and Connector Board - Large and Small Scale
MSRP: $98.42
Price: $78.74
You Save: $19.68
[ 2 ] pcs In Stock
 
ZIMO MXTAPV DCC Decoder Test and Connector Board - Large and Small Scale

Product Reviews

(0 Ratings, 0 Reviews)
 
INVENTORY
REDUCTION
SALE

Streamlined Backshop
has moved!

Too many engines.
Too many cars.
Too much track.

Great products at 
really, really great prices....


 

 


...featuring 
Real-Time 
Stock Status...
 

Shopping Cart
Your cart is empty.
 
 
   


 
24 - 7 - 365
Any time... All the time.

FREE SHIPPING

On Domestic Orders
Over $150

No Coupon Required 

Select

Free Shipping

Option At Checkout

Please Read Our
Limitations and Exclusions




WE SHIP
INTERNATIONAL
 
 
PLEASE REVIEW OUR
FOR TERMS AND 
CONDITIONS

 



Mailing Lists

MONTHLY NEWSLETTER

Mark up to receive great DCC Tips and information about New Products, Pre-Orders, Sales, and Special Promotions.



CLICK THE BUTTONS
for past newsletters and
great DCC Tip and Tricks

         

         
 


Welcome to SBS4DCC ...

Featuring 

Real-Time Stock Status 

Reporting



Featuring the

Roco smartRail

Rolling Track Display Stand 
with z21 Controlle
r...



... on the spot

Operating Fun!





Featuring the

Streamlined Backshop

"Sugar Cube" Speakers...





… the SWEETEST speaker 
available today!


4 Sizes  ...  14 Baffles

56 Sweet Speaker Options





Featuring the

Good Deals DCC

"The Programmer"
Test Tracks...


... Portable Programming

Made Easy




Featuring the

ESU LokTester

Decoder Test Station...



… take control of DCC Decoder

Testing and Programming!





Featuring The New

ZIMO MXTAP

Decoder Test Stations...




... The Ultimate Decoder

Test Platform!



Featuring the

Model Railroad Technologies

ACCUTRACK II

Scale Speedometer...





SPEED has met it’s MATCH !





Featuring the

TCS TrainSpeed

Digital Model Railroad 
Speedometers




… Permanent 
Model Train Speed 
Measurement and Display ...






 


Be sure to see our ads in 
these great publications.









 
National Model
Railroad Association

 

 
Support the NMRA
 
Join Today!



Layout Design 
Special Interest Group
 
 
Make your model 
railroad more than just 
another track plan!
 

 
 
 
 
Join The NMRA
LDSIG Today!
 

 

OPerations Special 
Interest Group


Stop Running Trains.
Start Model Railroading!


 
 
 
Join The NMRA
OpSIG Today!