| | |
|
| |
| | |
|
DCC Tools
DCC Standards
TBD
-------------------------
TBD
-------------------------
-------------------------
Stop by and say Hi!
Be sure to see us on
Be Sure To Check Out
The Latest Gear From
These Great DCC
Manufacturers
The DCC Gurus
|
ESU 64614 LokPilot V4.0 M4 Motorola Decoder - NEM660 21MTC Integral Connector
|
MSRP: $40.90
Price: $32.72
You Save: $8.18
[ 5 ] pcs In Stock
 
Backorders Accepted
 
Item Number: 64614
Manufacturer: ESU - Electronic Solutions Ulm
Manufacturer Part No: 64614
Save More With Quantity Discounts...
Quantity | Amount |
1 to 4 | $32.72 |
5 to 9 | $32.06 |
10 or more | $31.08 |
|
|
The ESU Decoder is DCC DONE RIGHT. They are one of the finest performing sound and motor control DCC decoders on the market today.
ESU DCC Decoders offer the following features:
-
Compact design makes this decoder suitable for nearly any installation in HO and larger scale models (frame modification may be required)
-
Analog AC or DC, Marklin, 2 or 4 Digit Addressing, 14-28-128 Speed Steps, and Consisting
-
Suitable for use with Marklin Central Station or other system using mfx as well as older systems including the Marklin 6020, 6021 and Delta.
- 1.1 Amp motor circuit with BEMF
-
Three-step or Loadable Speed Table and Forward / Reverse Trim Adjustment for Superior Speed Matching
-
Free Function Allocation (Function Mapping), F0 - F12
- Built-in motor circuit over-load protection and function output short circuit protection
Decoder Specifications:
-
Size: 0.84 x 0.62 x 0.22 Inch (21.3 x 15.5 x 5.5 mm)
-
Connection: 21MTC Integral Plug (NEM660)
-
Motor Rating: 1.1 Amp
-
Functions: (4) 250mA outputs (500mA Total) plus (2) Logic Level outputs
-
BEMF: Yes
-
Protocol: Marklin M4
-
Additional Features: Fwd and Rev Trim Adjustment
Manufacturers Website: ESU - Electronic Soultions Ulm
At this point we like to present to you the latest offspring of the LokPilot V4.0 decoder family. This LokPilot decoder is a real quad-protocol decoder and speaks, aside from DCC, Motorola® and Selectrix®, the M4 protocol! This makes the decoder “first choice” for all Märklin fans who do not want to do without mfx® or wish to have the most possible flexibility to all digital systems. The LokPilot V4.0 is available in all contemporary plug and interface versions, also including a PluX16 version.
Operational modes
The LokPilot V4.0 M4 is multi-protocol decoder meaning it speaks all common data formats such as DCC, Motorola® and Selectix® as well as M4. In DCC mode 14-128 speed steps are possible, as well as 2- and 4-digit addresses. You can activate up to 28 functions. Thanks to RailComPlus®, the decoders will be automatically recognised by a suitable command station. It is able to control all DCC programming modes und thus can be driven and programmed by all DCC-compatible digital command stations. CV values can be read out on the main track with corresponding command stations, thanks to RailCom®. There are indexed CVs for command stations which are only able to program CVs from 1-255. Motorola® users benefit from up to 28 speed steps with 255 addresses. Three further Motorola® addresses allow the activation of 16 functions. The installed programming mode makes re-programming with the venerable Control Unit® 6021 also possible. The M4 protocol ensures an automatic recognition of the decoder by mfx®-compatible command stations (e.g. Märklin® Central Station or mobile station®). Reprogramming of M4 decoders is still possible with the mentioned command stations, like with original Märklin® decoders. The LokPilot V4.0 M4 decoder auto-detects the known Märklin® braking sectors as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC (“Brake on DC”) is supported. Furthermore you will be able to stop your train by using the Selectrix® braking diode. The LokPilot 4.0 decoder can be used for both analogue DC or AC locomotives. The decoder automatically switches between the different operating modes “on-the-fly”. In most cases one does not have to adjust anything.
Motor control
The LokPilot V4.0 M4 decoder is equipped with fifth generation load compensation. Load control can either be adjusted to the model manually with the aid of 5 parameters or by using the “auto tune” feature of the decoder. This results in automatic adjustment of the motor characteristics in a test run. Never was it easier to adapt the control parameters to the motor. ESU decoders control all motor types without any problem, regardless if they are “classic” Märklin® motors, Fleischmann® round motors or coreless motors (e.g. Faulhaber®) or modern motors with flywheel(s). With Dynamic Drive Control (DDC) you can limit the influence of load control and thus you will be able to finely control your locomotive in the yard and when traversing turnouts while the speed will be prototypically reduced while travelling (at higher speeds) on a gradient on the mainline. SoftDrive® sinus motors, as used in many Märklin® models, can also be controlled by the LokPilot V4.0 M4 decoder. Thanks to SUSI this will also work for Trix® locos.
Functions
The LokPilot V4.0 M4 decoder has at least 4 function outputs, the PluX16 version even six. Beside that (with 21MTC) there are two unamplified outputs which can be also used for both light or special functions if connected with the appropriate adapter board (e.g. ESU 51968). All important light functions are available. The brightness of each output can be adjusted separately. Of course, the decoder is able to control the automatic decoupling move and push time for ROCO®, Krois® and Telex® couplers.
Safe operation
If desired it is possible to connect a PowerPack (ESU 54670, see »Accessories«) to the LokPilot V4.0 M4, as to all other ESU decoders of the 4th generation.
Protection
Of course, all function outputs and the motor current output are overload protected. We want you to have fun with your decoder as long as possible!
|
MSRP: $179.99
Price: $143.95
You Save: $36.04
[ 8 ] pcs In Stock
 
|
MSRP: $52.90
Price: $42.25
You Save: $10.65
[ 7 ] pcs In Stock
 
|
MSRP: $78.70
Price: $62.96
You Save: $15.74
[ 4 ] pcs In Stock
 
|
MSRP: $81.95
Sale Price: $68.95
You Save: $13.00
[ 20 ] pcs In Stock
 
|
MSRP: $11.50
Price: $8.62
You Save: $2.88
In Stock
 
|
MSRP: $16.50
Price: $12.35
You Save: $4.15
In Stock
 
|
MSRP: $11.50
Price: $8.62
You Save: $2.88
In Stock
 
|
MSRP: $12.50
Price: $9.35
You Save: $3.15
In Stock
 
|
MSRP: $98.42
Price: $78.74
You Save: $19.68
Out Of Stock - Call Or Email For Availability
 
|
Product Reviews
|
CHANGE OF ADDRESS
Streamlined Backshop
has moved...
again!
This was the final phase
of relocation and last time
I do this for a while...
I hope...
Please note new shipping
address for returns is:
Bryan Vianco
Streamlined Backshop
22638 Pin Oak Drive
Athens, AL 35613
Thanks for your patience
and understanding during
this time of transition.
...featuring
Real-Time
Stock Status...
24 - 7 - 365
Any time... All the time.
FREE SHIPPING
On Domestic Orders
Over $150
No Coupon Required
Select
Free Shipping
Option At Checkout
Please Read Our
Limitations and Exclusions
WE SHIP
INTERNATIONAL
PLEASE REVIEW OUR
FOR TERMS AND
CONDITIONS
| | |
|
MONTHLY NEWSLETTER
Mark up to receive great DCC Tips and information about New Products, Pre-Orders, Sales, and Special Promotions.
| |
| | |
|
CLICK THE BUTTONS
for past newsletters and
great DCC Tip and Tricks
Welcome to SBS4DCC ...
Featuring
Real-Time Stock Status
Reporting
Featuring the
Streamlined Backshop
"Sugar Cube" Speakers...

… the SWEETEST speaker
available today!
4 Sizes ... 14 Baffles
56 Sweet Speaker Options
Featuring the
Good Deals DCC
"The Programmer"
Test Tracks...
... Portable Programming
Featuring the
ESU LokTester
Decoder Test Station...
… take control of DCC Decoder
Testing and Programming!
Featuring The New
ZIMO MXTAP
Decoder Test Stations...
... The Ultimate Decoder
Test Platform!
Featuring the
Model Railroad Technologies
ACCUTRACK II
Scale Speedometer...

… SPEED has met it’s MATCH !
Featuring the
TCS TrainSpeed
Digital Model Railroad
Speedometers
… Permanent
Model Train Speed
Measurement and Display ...
Be sure to see our ads in
these great publications.
National Model
Railroad Association
Join Today!
Layout Design
Special Interest Group
Make your model
railroad more than just
another track plan!
Join The NMRA
LDSIG Today!
OPerations Special
Interest Group
Stop Running Trains.
Start Model Railroading!
Join The NMRA
OpSIG Today!
|
|