Digitrax
Digitrax DS74 Quad Switch Stationary Decoder
(No reviews yet)
Write a Review
- UPC:
- 652667080095
- MPN:
- DS-DS74
- Condition:
- New
- Availability:
- Backorders Accepted
Save More With Volume Discounts…
| Buy 5 - 9 | $61.94 each |
| Buy 10 or above | $60.04 each |
Description
Digitrax DS74 Quad Switch Stationary Decoder
The DS74 Stationary Decoder allows you to install and operate your turnouts directly through any DCC system that has turnout control. From Solenoid turnout machines to slow motion motors, this affordable, easy to install decoder will add another dimension to your operations.
Features
- Quad switch decoder for Solenoid or Slow-motion turnouts.
- Configurable for Capacitive Discharge with balky solenoids.
- Configurable for on/off control of 8 layout lights.
- Plug and play wire connectorization.
- Works with compatible LocoNet Systems.
- Stabilized and adjustable output voltages.
- Option setup switches for configuration.
- On-layout programmability via LocoNet.
- 8 onboard Routes, with EZ-Route setup.
- Routes directly editable using latest DT602 IPL.
- 8 input lines for Switch and Detection inputs.
- Field firmware update via IPL over LocoNet.
- DC 2mm jack for reliable power input.
- Optional DCC track inputs for limited feature capabilities.
Additional Resources
MANUFACTURERS WEBSITE: |
|
SOUND CONFIGURATION & SOUND FILE RESOURCES: |
|
FIRMWARE & SOFTWARE RESOURCES: |
|
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES: |
|
MANUFACTURERS WARRANTY & REPAIRS: |
|
ADDITIONAL INFORMATION - DCC TIPS: |
|
ADDITIONAL INFORMATION (1): |
|
ADDITIONAL INFORMATION (2): |
Additional Information
PRODUCT CLASS : |
All Scales |
DECODER TYPE: |
Accessory - Switch |
DECODER INTERFACE (PRIMARY): |
Screw Terminal |
DECODER INTERFACE (SECONDARY): |
NA |
SIZE-INCH (L x W x H): |
0 x 0 x 0 in |
SIZE-METRIC (L x W x H): |
0 x 0 x 0 mm |
FUNCTION CURRENT: |
0A continuous |
TRACK SECTION INPUT-OUTPUT: |
0 |
CIRCUIT BREAKER: |
NA |
AUTO REVERSER: |
NA |
OCCUPANCY DETECTION: |
NA |
FUNCTION CONTROL INPUTS: |
8 |
SWITCH MOTOR FUNCTION OUTPUTS: |
4 |
STATIONARY - SIGNAL LIGHTING FUNCTION OUTPUTS: |
8* |
SWITCH MOTOR TYPE - STALL MOTOR (TORTOISE SLOW-MOTION): |
YES |
SWITCH MOTOR TYPE - TWIN COIL SOLENOID (ATLAS SNAP): |
YES |
SWITCH MOTOR TYPE - BI-POLAR SOLENOID (KATO-PIKO-LGB): |
NO |
SWITCH MOTOR TYPE - SERVO MOTOR: |
NO |
PROTOCOL: |
LocoNet |
BI-DIRECTIONAL COMMUNICATION: |
NA |
ADDITIONAL FEATURES: |
NA |
NOTES (1): |
* Optional configuration - see manual |
NOTES (2): |
NA |
Related Products
Digitrax DS44 Basic Quad Stationary Decoder
Digitrax
MSRP:
$43.00
Price:
$34.40
Digitrax DS44 Basic Quad Stationary Decoder
Basic Quad Stationary Decoder for Slow Motion Turnout Machines, add cost effective DCC control to your slow motion turnouts.
Digitrax DS52 Dual Stationary Decoder for Snap Switches or Slow Motion Machines
Digitrax
MSRP:
$28.00
Price:
$22.40
Digitrax DS52 Dual Stationary Decoder for Snap Switches or Slow Motion Machines
Dual Stationary Decoder for Bi-polar, Snap Switches or Slow Motion Machines
Digitrax DSXCP1 Fascia Mount Switch Control Device for the DS74
Digitrax
MSRP:
$16.00
Price:
$14.40
Digitrax DCC DSXCP1 Fascia Mount Switch Control Device for the DS74
The DSXCP1 is simple way to add point-of-use interface to control switches on your DS74.
Digitrax DS51K1 Stationary Decoder For Single Kato Unitrack Turnouts
Digitrax
MSRP:
$19.00
Price:
$16.15
Digitrax DS51K1 Stationary Decoder For Single Kato Unitrack Turnouts
DS51K1 Stationary Decoder For Single Kato Unitrack Turnouts, easy cost effective way to add DCC control to your Kato...
NCE DCC "Q-Snap" Quad Twin Coil Stationary Switch Decoder
NCE - North Coast Engineering
MSRP:
$89.95
Price:
$71.96
NCE DCC "Q-Snap" Quad Twin Coil Stationary Switch Decoder
FOR TWIN COIL SWITCH MACHINES ONLY
<
Digitrax DSXC4 Input Interconnect Board for DS74
Digitrax
MSRP:
$15.00
Price:
$13.50
Digitrax DSXC4 Input Interconnect Board for DS74
The DSXC4 is simple to install, wire or plug in, and begin using to control switches on your DS74.
Digitrax DS78V Stationary Servo Decoder - Eight Servo LocoNet & Accessory decoder for turnout control
Digitrax
MSRP:
$85.00
Price:
$68.00
Digitrax DS78V Stationary Servo Decoder - Eight Servo LocoNet & Accessory decoder for turnout control
The DS78V Stationary Decoder allows you to install and operate your turnouts directly...
On Sale
PRE-OWNED Digitrax DS78V Stationary Servo Decoder - Eight Servo LocoNet & Accessory decoder for turnout control
Digitrax
MSRP:
$85.00
Price:
$59.50
Was:
$68.00
These are new units. The were opened and then returned after customer discovered I shipped the wrong product. One unit of the five total has a broken mounting lug from the extra handling...
NCE DCC "Switch-Kat" Kato Unitrack Stationary Switch Decoder
NCE - North Coast Engineering
MSRP:
$37.95
Price:
$30.36
NCE DCC "Switch-Kat" Kato Unitrack Stationary Switch DecoderYour Kato Unitrack and LGB remote control turnouts can no